Linear Prox.Pad
Wiegand 125 kHz Proximity Reader with Keypad
$311.30
Use for stand-alone access, or integrate with Linear access control systems and most Wiegand systems.
In stock
Need assistance or have questions? Call our Cabinet Product Specialists at 877-439-5377 for more information and ordering assistance. We’re here to help!
Need assistance or have questions? Call our Commercial Product Specialists at 877-439-5377 for more information and ordering assistance. We’re here to help!
- Integrated door control, proximity reader and keypad
- PIN only; PROX only; PIN + PROX
- Supports 2000 users in stand-alone mode at a single door
- Bi-color LED to indicate operation
- Accommodates all 26-bit HID cards, including: ProxCard II, IsoProx II, and Proxkey FOB
- 1000 Event audit trail
- Two relay outputs (main and aux.) and two inputs (monitor door position and REX switch)
- Fits over a single-gang electrical box
- Glass-mount option included
- UL 294 Listed
Dimensions | 5.25 (H) x 2.75 (W) x 1.375 (D) in. |
---|---|
Users | 2,000 |
Code Length | 1 to 6 Digits |
Event Audit Trail | 1,000 |
Environmental | Indoor/Outdoor |
Outside Operating Temperature Range | -31° to 151°F (-35° to 66°C) |
Manufacturer | Nice, Nortek |
Reader Type | Keypad, Prox Card/Fob |
Brand | Linear |
Power | 10-15 VDC |
Weight | 2.5 lbs |
Warranty | 2 Year Manufacturer |
Share your thoughts!
Let us know what you think...
2 reviews with a 4-star rating
Customer Questions & Answers
- Answered by the admin
This product does not come with any proximity cards. These must be purchased separately. You may find the proximity cards here.
- Q Can the card reader be mounted outside on a brick surface with the keypad mounted inside? answer nowAsked by November 13, 2022 12:12 AMonA
No, the keypad and reader on this unit are integrated, they cannot be mounted separately. The Linear P-300HA reader can be mounted outside by itself, though.
- Q Will this replace a Sargent 4293 that is used as a keypad only for a single door with an electric... answer nowAsked by July 1, 2021 12:30 PMonAnswered by the admin
This certainly can be used as a stand-alone keypad to operate a single electric strike.
- Q Can you have a card swipe open the 2 relays and have them stay open and 2nd card swipe close the ... answer nowAsked by February 13, 2020 12:55 PMonAnswered by the admin
This can be accomplished when the prox pad is programmed through the Linear E3 system.
- Q How do you use this device for a commercial building so the doors can remain unlocked during busi... answer nowAsked by February 1, 2019 5:09 PMonA
It would be wired to an access system such as Linear eMerge, or used in a stand-alone method where it is connected to a strike or magnetic lock system and then the keypad is programmed by hand. We would highly recommend you speak with our commercial staff before purchasing to ensure you are getting the right product for your needs.
- Q Is this the same unit as the Sargent 4293? It appears identical in the photo except for the logo. answer nowAsked by December 7, 2018 4:50 PMonA
While the design might be the same and much of the internals, the operational software would be different. If you are only using it as a front end Weigand reader with an already established Access Control system it would work like any other Weigand reader. However, if you are looking for a direct replacement of the Sargent using Sargent software, this would not work. We would encourage you to speak with our commercial sales department to ensure you are getting the right product for your needs.
Terry Reed (verified owner) –
The replacement was exactly what I ordered. There was no problem with the hardware but configuring it as a replacement within our outdated software (Millinium Expert) seemed a bit complicated as we needed our system up and running quickly. Our old device had a failure based on worn out contacts on the rubber keypad. Our quick solution was to simply exchange the circuit board from the old device and it worked very well. It would be nice if we could have only ordered the rubber keypad for the worn part – – cost would/should have been much less. However, GoKeyless had the best price anywhere on the internet for a replacement this product provided the solution to resolve our issue!!
(0) (0) Watch Unwatch
Clayton (verified owner) –
I installed with a Linear control. Easy to interface.
(0) (0) Watch Unwatch