Schlage MT11
Multi-Technology Reader - Mullion Mount
$304.22
Reads 125 kHz proximity and 13.56 MHz smart cards.
In stock
Need assistance or have questions? Call our Cabinet Product Specialists at 877-439-5377 for more information and ordering assistance. We’re here to help!
Need assistance or have questions? Call our Commercial Product Specialists at 877-439-5377 for more information and ordering assistance. We’re here to help!
- Accommodates interior, exterior, metal, and non-metal installation environments
- Recognizes most proximity credentials, and Schlage smart credentials (MIFARE classic and MIFARE DESFire EV1)
- Reads CSN (card serial numbers) of HID iCLASS, Inside Technologies PicoTag, ST Microelectronics, Texas Instruments Tag-It, and Phillips I-Code
- FIPS 201-1 Compliant
- NFC Compatible
- Quick-connect design for easy installation
- Simple wiring – color scheme is identical to most readers in the market
- Easy-to-install mounting bracket
- Tri-state LED (red, green, amber) visual indicator and audio feedback representing status and activity information, easily discernible for the audibly or visually impaired.
- Rounded corners, flush fit to mullion
- Wiegand output for simple interface with most access control panels
- Standard color is black. Multiple reader cover color options including gray, brown, and cream may be specially ordered
- Limited Lifetime Warranty
- Multi-technology readers may also be specially ordered with RS-485 capability
- The MT11 reader is a replacement for the (S)XF1100 and (S)XF1200 legacy reader products
Specs
- Physical Dimensions (HWD): 5.91″ x 1.72″ x 0.81″
- Frequency: 13.56 MHz and 125 kHz
- Standard Default PIV Output: 75 bit†
- Standards: ISO 14443A, 14443B, 15693
- Power: 5-16 VDC
- Wiring: 18 or 20 AWG 12 shielded wire, depending on distance to panel
- Read Range: Proximity: Up to 5” (12.7 cm), MIFARE: Up to 4” (10 cm), DESFire EV1: Up to 2” (5.1 cm), PIV Credential: Up to 2.5” (6.5 cm)
- Operating Temperatures: -40 to 158F (-40 to 70C)
- Material: PBT Polymer
† Configurable to other output formats. Check with access control provider for specific support.
Brand | Schlage |
---|---|
Manufacturer | Allegion |
Reader Type | Front-end Only, Multi-Technology, Prox Card/Fob, Smart Card |
Customer Questions & Answers
- Q How do the wires connect?(plug in, screw terminal, or crimp) answer nowAsked by July 6, 2021 6:19 PMonAnswered by the admin
There is a supplied cable connector for this reader. The wires would be crimped with this cable, then plugged into the back of the reader.
- Q Can this be plugged into an existing cable to replace the same card reader? Or does the reader ha... answer nowAsked by September 1, 2020 8:05 PMonAnswered by the admin
This reader can be installed in place of an existing reader as all access information is stored within the control panel that the reader is wired to.
- A
It must be connected to the CTE control board in order to be used with Engage. We would recommend you speak with our Commercial sales team before purchasing.
What others are saying
There are no contributions yet.