Touchless Entry Kit with ADA Compliance by SDC

This bundle includes (1) SDC AUTO EntryControl Low Energy Swing Automatic Door Operator, (2) SDC 474U Touchless Wave-to-Exit Switches, (1) CBC482A4U Bollard with CBC Compliant ADA Push Plates, (1) 482A2U Wall-Mounted ADA Push Plate, (1) 400W1-433 Transmitter and 400RC433 Receiver for ADA Push Plate

Touchless Entry Kit by SDC (Non-ADA) bundle available

SDC AUTO EntryControl Low Energy Swing Door Operator

• Plug N Play Access Control System Installation
• Easy Installation
• Single Button, Self-Tuning Setup
• Momentary Pull
• Power-Close Option
• ADA Compliant handicap and automatic door opener
• Complies with ANSI A 156.19
• UL – Certified for use as fire door operators (3 hour rating)
• Self-Tuning, Self-Learning
• Minimum 5 seconds from close to open
• Stays open for 5 seconds
• Force: 15 lbs -6.8 kg
• Push or Pull (In door, Out swing)
• Activation: Knowing Act via Card Reader/Keypad, or REX switch
• Optional Safety Device, Auto-IR Presence Sensor and Door Re-Activator
• Power: 1A, 100W
• Aluminum color, dark bronze may be special ordered POA
• Extremely Quiet Operation

SDC 474U Touchless Wave-to-Exit Switch

• Uses IR Sensor technology; device is active with the simple wave of a hand
• Designed to control electric locks/strikes, magnetic locks, or automatic door operators
• Ideal for use in sanitary applications such as cleanrooms, bathrooms, food processing, hospitals and labs
• Sensing Range up to 4 in. (10cm)
• Mounted on a durable stainless steel plate
• Dual LED, illuminated sensor, Red/Green indicates Inactive/Active status
• Quick connect screw-less terminal block for easy installation

474U Specs

• Input: 25mA (standby); 55mA (Active) @ 12/24VDC
• Output: 2-SPDT, 3 Amp Dry Contact
• Activation Time:  5 seconds or as long as sensor is triggered
• LED Color:  Standby RED; Active Green
• Range:  4 in. (10cm)
• Weight:  3 oz. (85g)
• Dimensions:  4.5 in. x 2.75 in. x 1.375 in. (115 x 70 x 35mm)

CBC482A4U Bollard Post with CBC Compliant ADA Push Plates

• CBC Section 11B 404.3 code compliant bollard and switch plates
• Black HDPE mortised removable cap with secure transmitter mount (wireless transmitter optional and sold separate)
• Two 4-1/2 in. “Push to Open” blue infill push plates, located at 7 in. and 36 in. centerline from floor
• 6 in. square post with 1/8 in. walls
• Surface mount (42 in.)

400W1-433 433MHz Micro Transmitter

• Requires a Non-Metallic Surface Box or Standard Bollard Cap (non-metallic)
• Pre-Wired for Quick Installation
• Antenna Magnifies Signal
• Works with 400RC433

400RC433 433MHz One Channel Receiver

• Designed to Control Automatic Closing and Anti-Burgular Systems
• Works with 400W1-433

482A2U Wall-Mounted ADA Push Plate

• Pressing Any Part of the Push Plate (2 3/4 in. x 4 1/2 in.) Causes Switch Actuation
• Recessed Surface Box or Bollard Mount
• Depth: SPDT – 7/8 in. Deep; DPDT – 1-3/8 in. Deep
• Weight 0.6 lbs