Trilogy Networx AL-IME2
Version 2 Gateway
$339.28
In Stock
- Version 2 model virtually same as the original “version 1” Gateways, but with added ability to expand your Networx lock system with up to 7 Expanders (model AL-IME2-EXP)
- Expanders cannot communicate with older “non-version 2” Gateways
- Next generation of Networx Gateways
- Mount within 175 feet (radially) from the intended wireless lock location(s)
- Open areas increase range while concrete building construction, walls, ceilings and narrow corridors decrease range
- Expanders should be mounted in elevated areas; however mounting in a drop ceiling can adversely affect signal strength
- Preferred mounting position = 6 to 12″ below standard 8-9 foot ceiling
- Cost-effective and easier to wire than conventional gateways
- Simplified ‘Plug and Play’ setup; Networx system automatically identifies all newly powered Expanders and quickly self-determines the best wireless signal pathways
- Each Gen. 2 Gateway and a maximum of seven (7) Expanders can be addressed as one group – IT Friendly!
- Total of 99 addressable groups supported (addressable by two rotary switches)
- Both Generation 2 Gateways and matching AL-IME2-EXP and plug-in AL-IME2-PIE Expanders have a new modern styling, and three LED indicators, blending into any decor
Note: Version 2 Gateways CAN be mixed into an existing system that includes older “non-version 2” gateways.
IT friendly the AL-IME2 is a Gateway device used within the Trilogy Networx™ wireless system. This Version 2 Gateway combines with wireless wall-mounted expanders and plug-in wireless expanders to cover more building space with 1 ip address vs. 8. The result is increased range with a reduction in project costs. Installation is simple, with the AL-IME2 only requiring access to one RJ-45 Ethernet network cable and connection to an AC outlet.
| Dimensions | 4.5 (H) x 6.0 (W) x 1.94 (D) in. |
|---|---|
| Environmental | Operating Temperature: -4˚ to 140˚F (-20˚ to 60˚C) |
| Storage Temperature Range | -40° to 185°F (-40° to 85°C) |
| Network Interface | Ethernet, 10Base-T or 100Base-TX (using RJ-45 jack) |
| Wireless Protocol | 900MHz, DHCP, TCP/IP, UDP/IP |
| Power | 5 – 6 volts AC |
| Current | 650 mA |
| Manufacturer | Alarm Lock |
| Brand | Trilogy Networx |
| Weight | 0.5 lbs |
| Warranty | 2 Year Manufacturer |
Customer Questions & Answers
- Answered by the admin
The Networx system is a Windows PC-based software and does not support mobile connectivity.
- Q Presumably, this Gateway communicates with the door lock wirelessly, does it also communicate wit... answer nowAsked by on May 3, 2018 4:29 PMA No, you can purchase this as a WIFI unit as well. AL-IME802.11 is the part number.
- A Yes there is, please check out the link provided below for the POE model of this gateway. https://www.gokeyless.com/product/trilogy-networx-al-ime2-poep-version-2-power-ethernet-gateway/
- Q Is this system capable of taking possibly 12 different building networks and condensing them all ... answer nowAsked by on August 23, 2017 2:02 AMA This system is designed to operate off your primary network first. If you have subnet networks at the other locations, you will simply configure the gateway on the primary network location first and then install the gateway on the subnet network after the configuration. Once this is complete the gateway will point back to the primary network location. This allows you to manage the buildings and gateways from a single location without having to go to each individual building.
What others are saying
There are no contributions yet.