dormakaba DKPS Series

Name: dormakaba DKPS Series
SKU: DKPS
Availability: InStock

Power Supply

$256.67 – $495.00

Safe and reliable power. The dormakaba DKPS Series Power Supply provides continuous power to your access controlled and perimeter doors. With a field selectable power output switch and up to 8 supervisory outputs, this device is well suited to power electric strikes, maglocks and more.

SKU: DKPS

Need assistance or have questions? Call our Cabinet Product Specialists at 877-439-5377 for more information and ordering assistance. We’re here to help!

Need assistance or have questions? Call our Commercial Product Specialists at 877-439-5377 for more information and ordering assistance. We’re here to help!

Power supply for access controlled and egress doors – available in 2, 4, and 6 Amp models
Supplies 4 to 8 outputs of nominal and continuous power ideal for supporting a host of electronics and access devices
Built-in dedicated charger for sealed lead acid or gel cell type batteries
Battery load and charge test every 48 hours
Battery reversal protection
Low battery indication at 11.40/22.80 volts
Low battery disconnect at 10.10/20.30 volts
Immediate switch-over to stand-by battery upon AC failure
Common “Batt.Fault” CMOS relay and indicator for all battery and charger fault 30VDC@60mA
CMOS relay output and indicator for AC failure within 60 seconds 30VDC@60mA
LEDs status display on enclosure door
Common “Out Fault” CMOS relay for DC failure on any of the outputs 30VDC@60mA
Battery charging leads included
FPDB (Fire Panel Disconnect Board) now a standard feature
Tamper switch optional (required when installation must meet UL294 Edition 6 or higher)

DKPS-2A Electrical Specifications

Input Voltage – 110-220VAC, 50-60Hz 2.4A
Output Voltage – Selectable 12 or 24 VDC voltage outputs
Each output max 2.0 A with electronic over-current protection set at 2 Amp
4 voltage outputs

DKPS-4A Electrical Specifications

Input Voltage – 110-220VAC, 50-60Hz
Output Voltage – Selectable 12 or 24 VDC voltage outputs
Each output max 2.0 A with electronic over-current protection set at 4 Amp
8 voltage outputs

DKPS-6A Electrical Specifications

Input Voltage – 110-220VAC, 50-60Hz. 2.5A
Output Voltage – Selectable 12 or 24 VDC voltage outputs;
Each output max 2.0 A with electronic over-current protection set at 6 Amp
8 voltage outputs

Electrical Devices Supported

Electromagnetic locks
Electric strikes
Specialty locks
Access control systems
Motorized latch retraction (MLR)
Egress doors and exit devices

Applications

Power to access control systems
Power electric locking systems
Power electromagnetic locking systems
Can also power a host of other electronic and access systems

The dormakaba DKPS Series Power Supply provides continuous power to your access controlled and perimeter doors. Its versatile power output is ideal for powering most components of your access control system such as electric strikes, maglocks and more. Featuring a 12/24VDC field selectable power output switch and up to 8 supervisory outputs (AC power fail, battery fail, DC Fail, etc). These supervisory outputs can be connected to remote access control units to monitor the power supply during operation. In the event of a power outage, your system will still function as the DKPS will immediately switch over to stand-by battery operation (backup battery NOT included). This power supply is well suited for applications where integration with a fire alarm system or battery backup is needed.

Dimensions	Metal Enclosure: 17 5/8 (H) x 13 5/16 (W) x 4 5/16 (D) in., Power Distribution Controller Board: 3 1/2 (H) x 7 3/8 (W) in., Power Supply Board: 4 5/16 (H) x 7 11/16 (W) in.
Voltage	110-220VAC
Output	600mA/300mA @ 12/24VDC (Field Selectable)
Amp	2 AMP, 4 AMP, 6 AMP
Color	White
Brand	dormakaba
Manufacturer	dormakaba
Operating Temperature	32º to 120º F (0º to 49º C)
Environmental	Indoor ONLY
Weight	12 lbs
Warranty	Manufacturer Limited Lifetime