Over 5 million soldOver 5 Million Locks Sold
GoKeyless TrustedTrusted Since 2003
CartCart 0

Your Cart is Empty

Categories
  • Padlocks

  • Industry
  • dormakaba DKPS Series

    Power Supply

    SKU: COMM-DKPS-2A

    dormakaba



    Safe and reliable power. The dormakaba DKPS Series Power Supply provides continuous power to your access controlled and perimeter doors. With a field selectable power output switch and up to 8 supervisory outputs, this device is well suited to power electric strikes, maglocks and more.

    Amp

    Quantity left : 0

    Shield

    EXTENDED PROTECTION PLAN

    3 Years of SHIELD Coverage

    Product Replacement | Extended Return Policy | Price Protection

    Terms and Conditions

    $53.90

    • Power supply for access controlled and egress doors – available in 2, 4, and 6 Amp models
    • Supplies 4 to 8 outputs of nominal and continuous power ideal for supporting a host of electronics and access devices
    • Built-in dedicated charger for sealed lead acid or gel cell type batteries
    • Battery load and charge test every 48 hours
    • Battery reversal protection
    • Low battery indication at 11.40/22.80 volts
    • Low battery disconnect at 10.10/20.30 volts
    • Immediate switch-over to stand-by battery upon AC failure
    • Common “Batt.Fault” CMOS relay and indicator for all battery and charger fault 30VDC@60mA
    • CMOS relay output and indicator for AC failure within 60 seconds 30VDC@60mA
    • LEDs status display on enclosure door
    • Common “Out Fault” CMOS relay for DC failure on any of the outputs 30VDC@60mA
    • Battery charging leads included
    • FPDB (Fire Panel Disconnect Board) now a standard feature
    • Tamper switch optional (required when installation must meet UL294 Edition 6 or higher)

    DKPS-2A Electrical Specifications

    • Input Voltage – 110-220VAC, 50-60Hz 2.4A
    • Output Voltage – Selectable 12 or 24 VDC voltage outputs
    • Each output max 2.0 A with electronic over-current protection set at 2 Amp
    • 4 voltage outputs

    DKPS-4A Electrical Specifications

    • Input Voltage – 110-220VAC, 50-60Hz
    • Output Voltage – Selectable 12 or 24 VDC voltage outputs
    • Each output max 2.0 A with electronic over-current protection set at 4 Amp
    • 8 voltage outputs

    DKPS-6A Electrical Specifications

    • Input Voltage – 110-220VAC, 50-60Hz. 2.5A
    • Output Voltage – Selectable 12 or 24 VDC voltage outputs;
    • Each output max 2.0 A with electronic over-current protection set at 6 Amp
    • 8 voltage outputs

    Electrical Devices Supported

    • Electromagnetic locks
    • Electric strikes
    • Specialty locks
    • Access control systems
    • Motorized latch retraction (MLR)
    • Egress doors and exit devices

    Applications

    The dormakaba DKPS Series Power Supply provides continuous power to your access controlled and perimeter doors. Its versatile power output is ideal for powering most components of your access control system such as electric strikes, maglocks and more. Featuring a 12/24VDC field selectable power output switch and up to 8 supervisory outputs (AC power fail, battery fail, DC Fail, etc). These supervisory outputs can be connected to remote access control units to monitor the power supply during operation. In the event of a power outage, your system will still function as the DKPS will immediately switch over to stand-by battery operation (backup battery NOT included). This power supply is well suited for applications where integration with a fire alarm system or battery backup is needed.

    Basic

    Manufacturer dormakaba USA Inc.
    Color White
    Voltage 110-220VAC
    Warranty Manufacturer Limited Lifetime
    Brand dormakaba

    Door requirements

    Security

    Dimensions

    Dimensions Metal Enclosure: 17 5/8 (H) x 13 5/16 (W) x 4 5/16 (D) in., Power Distribution Controller Board: 3 1/2 (H) x 7 3/8 (W) in., Power Supply Board: 4 5/16 (H) x 7 11/16 (W) in.
    Weight 12 lbs